Installation

INSTALLATION





NOTE: If a bearing flange stud is loose or has backed out tighten stud to 27 Nm (20 ft. lbs.).

1. Install bearing on axle shaft (1) with new O-ring on axle.




2. Slip O-ring (2) through backing plate, then push the bearing through backing plate until bearing (1) is exposed.
3. Installnew O-ring (2) on axle bearing (1).




4. Push axle into axle tube.
5. Install axle (2) flange nuts (1) and tighten to 119 Nm (88 ft. lbs.).




6. Install speed sensors (2) in axle tube (1) flange.
7. Install calipers and rotors.