Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2008 >> Commander 2WD V8-4.7L >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Exhaust Gas Recirculation >> EGR Valve >> Service and Repair >> EGR Valve - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

EGR Valve - Removal







REMOVAL - 4.7L





The electronic EGR valve and solenoid assembly (4) is attached to the rear of the left cylinder head. An exhaust gas routing tube (3) connects the EGR valve to the intake manifold.

1. Use a diagnostic scan tool to record any DTC's (Diagnostic Trouble Codes).
2. Disconnect and isolate the negative battery cable.
3. Remove plastic windshield cowl panel.
4. Remove windshield wiper motor.




5. Remove electrical connector (5) at top of EGR valve solenoid.
6. Remove tube mounting bolt (1) at intake manifold.




7. Remove two bolts (4) connecting EGR tube (1) to valve assembly.
8. Remove gasket located between EGR tube flange and EGR valve assembly.
9. Remove two EGR valve mounting bolts (5).
10. Separate valve assembly (3) from engine.
11. Remove and discard metal gasket located between cylinder head and valve assembly.
pro multis · About Operation CHARM