Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2008 >> Commander 2WD V8-4.7L >> Repair and Diagnosis >> Wiper and Washer Systems >> Wiper Arm >> Service and Repair >> Wiper Arm Park Ramp >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation







INSTALLATION





1. Check to be certain that the rivet nut (4) is properly installed and in good condition in the liftgate outer panel. Replace the rivet nut, if required.
2. Position the wiper arm park ramp (5) over the rivet nut on the liftgate outer panel.
3. Install and tighten the screw (6) that secures the park ramp to the liftgate outer panel. Tighten the screw to 6 Nm (55 in. lbs.).
4. Reinstall the rear wiper arm onto the park ramp and the rear wiper motor output shaft (3). Wiper Arms - Installation.
pro multis · About Operation CHARM