Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2008 >> Commander 2WD V8-5.7L >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> Cylinder Block Assembly >> Harmonic Balancer - Crankshaft Pulley
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Harmonic Balancer - Crankshaft Pulley

HARMONIC BALANCER TORQUE

CAUTION: To prevent severe damage to the Crankshaft, Damper or Damper Installer 8512-A, thoroughly clean the damper bore and the crankshaft nose before installing Damper.

1. Slide damper onto crankshaft slightly.

CAUTION: Special Tool 8512-A, is assembled in a specific sequence. Failure to assemble this tool in this sequence can result in tool failure and severe damage to either the tool or the crankshaft.

2. Assemble Damper Installer 8512-A as follows, thread nut (2) onto the bolt (3) then install the roller bearing (1) followed by the hardened washer (5) slides onto the threaded rod (3). Once assembled coat the threaded rod's threads with Mopar(R) Nickel Anti-Seize (or equivalent).
3. Using Damper Installer 8512-A, press damper onto crankshaft.
4. Install then tighten crankshaft damper bolt to 176 Nm (129 ft. lbs.).
pro multis · About Operation CHARM