Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation

INSTALLATION

1. Install a new rear output shaft seal into the rear cover with Installer 6952-A.
2. Install the rear output shaft flange (1) onto the output shaft (2).

3. Using Holder C-3281 (1), install the rear companion flange (2) nut. Tighten the bolts to 122-176 Nm (90-130 ft.lbs.).
4. Install the rear propeller shaft. Propeller Shaft - Removal
5. Check the transfer case fluid level. Procedures Correct as necessary.