Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2008 >> Commander 4WD V8-5.7L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Service and Repair >> Removal and Replacement >> Transfer Case - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transfer Case - Installation







INSTALLATION





1. Mount transfer case (1) on a transmission jack.
2. Secure transfer case to jack with chains.
3. Position transfer case under vehicle.
4. Align transfer case (2) and transmission (3) shafts and install transfer case onto transmission.
5. Install and tighten transfer case attaching nuts (2) to 35 Nm (26 ft. lbs.) torque.
6. Connect the transfer case vent hose (4) to the transfer case.




7. Install rear crossmember and skid plate, if equipped.
8. Remove transmission jack and support stand.
9. Connect front propeller shaft and install rear propeller shaft. Propeller Shaft - Installation
10. Fill transfer case with correct fluid. Check transmission fluid level. Correct as necessary.
11. Install the transfer case fill plug (1). Tighten the plug to 20-34 Nm (15-25 ft.lbs.).
12. Connect the shift motor and mode sensor wiring connector.
13. Lower vehicle and verify transfer case shift operation.
pro multis · About Operation CHARM