Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2008 >> Compass 4WD L4-2.0L >> Repair and Diagnosis >> Lighting and Horns >> Service and Repair >> Removal and Replacement >> Front Lamp Unit - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Lamp Unit - Installation







LAMP





1. Position the headlamp unit (1) close enough to the front of the vehicle to reconnect the engine compartment wire harness connectors to the back of the lamp housing.
2. On export market vehicles only, reconnect the engine compartment wire harness (6) connector (5) to the headlamp leveling motor connector receptacle (3), the connector (7) to the position lamp connector receptacle (8), and the connector (4) to the headlamp bulb terminals (2).




3. On domestic market vehicles only, reconnect the engine compartment wire harness (3) connector (4) to the headlamp bulb connector receptacle (2).




4. Position the headlamp unit (1) mounting brackets onto the three studs (3) on the front fender and front end support structure.
5. Install and tighten the three nuts (2) that secure the lamp mounting brackets to the studs. Tighten the nuts to 3 Nm (25 in. lbs.).
6. Reinstall the fascia onto the front of the vehicle. Front Fascia - Installation.
7. Reconnect the battery negative cable.
8. Confirm proper headlamp alignment. Procedures.
pro multis · About Operation CHARM