Removal

REMOVAL

1. Perform the Fuel Pressure Release procedure.
2. Disconnect the Negative Battery Cable.
3. Remove the Engine Cover.
4. Remove the Air Filter Housing and Intake Tube.
5. Remove the Engine Cover Support Brace.
6. Remove the Turbocharger Intercooler Tube.
7. Remove the Lower Turbocharger Intercooler Flex Hose.
8. Position the Vacuum Pump aside.
9. Disconnect the EGR Airflow Valve and IAT harness connectors.
10. Disconnect the EGR Tube from the Charge Air Crossover Manifold, located upstream of the Intake Manifolds.
11. Remove the IAT Sensor Housing Bracket bolts and Bracket.
12. Remove the Fuel Line Support.
13. Remove the IAT Sensor Housing retaining bolts and remove the IAT Sensor Housing.
14. Remove the EGR Airflow Valve bolts.
15. Remove the EGR Airflow Valve.