Installation

INSTALLATION





1. Position the rear glass run channel (2) onto the rear door.
2. Engage the bolt (3) into the keyed hole on the inside door panel.
3. Install the bolt (4) that secures the bottom of the rear glass run channel to the inside door panel. Tighten the bolt to 8.5 Nm (75 in. lbs.).
4. Tighten the bolt that secures the top of the rear glass run channel to the inside door panel to 8.5 Nm (75 in. lbs.).
5. Install the weatherstrip into the rear glass run channel.




6. Install the watershield. Installation