Rear Door Trim Panel

REMOVAL






1. Remove the door handle trim bezel (3).
2. Remove the power window switch (1) and disconnect the electrical connector (2).






3. Using a very thin pry tool, release the cap screw covers (2) from the door trim.
4. Remove the screws (1) from the front door trim.
5. Carefully remove the door trim panel from the door, by lifting upward until it is removed from the door lock and the mounting attachments (3) on the carrier plate.

INSTALLATION
1. Carefully install the door trim panel to the door by lifting it upward and over the door lock into the trim panel. Attach the trim panel hooks (3) to the carrier plate attachment points.






2. Install the screws (1) to the front door trim.
3. Install the cap screw cover (2) to the front door trim.






4. Connect the electrical connector (2) and install the power window switch (1).
5. Install the door handle trim bezel (3).