Rear Seat

DISASSEMBLY

60/40 Seat Back- 60





1. Remove screw and trim covering from the hinge.




2. Remove the bracket nuts (3), trim attachment bracket (2) and bracket (1) from the hinge (4).




3. Remove the seat back trim panel (1) from the seat back frame (2).




4. Remove the bolts (1) from the left hinge.




5. Remove the bolts (1) from the right hinge.




6. Remove the seat belt trim from the top of the seat cushion.




7. Depress the tabs (3) on the head rest guide (1) and remove from the top of the seat cushion (2).
8. Remove the seat belt through the cover and cushion.
9. Remove the cover and cushion from the seat back frame.
10. Position the seat cover to expose the hog rings and cut off all hog rings to separate the cover from the cushion.




11. Remove the bolt retaining the seat belt assembly from the seat back frame.

60/40 Seat Back- 40





NOTE: Mark the position of the recliner handle prior to removal. This will make sure that the recliner handle is in the proper position after installation.

1. Trace (1) an outline of the recliner handle. Remove screw (2) and the floor bracket trim (3) from the hinge.




2. Remove the screw (2), washer (1) and recliner handle (3) from the floor bracket.




3. Remove the bracket nuts (1), trim attachment bracket (2) and bracket (4) from the hinge (3).




4. Remove the bolts (1) from the right hinge.




5. Remove the left floor bracket from the seat frame.




6. Remove the seat back trim panel (1) from the seat back frame (2).
7. Remove the hog ring attaching the seat back cushion to the seat frame.
8. Remove the seat cover clips from the seat back frame.




9. Depress the tabs (3) on the head rest guide (1) and remove from the top of the seat cushion (2).
10. Remove the cover and cushion from the seat back frame.
11. Position the seat cover to expose the hog rings and cut off all hog rings to separate the cover from the cushion.