Removal

REMOVAL





1. Disconnect negative cable from battery.
2. Remove accessory drive belt Accessory Drive Belt - Removal.
3. Remove A/C compressor mounting fasteners and set aside.
4. Drain cooling system Service and Repair.
5. Remove upper radiator hose.
6. Disconnect electrical connector for fan mounted inside radiator shroud.
7. Remove radiator shroud attaching fasteners.
8. Remove radiator cooling fan and shroud Radiator Fan - Removal.
9. Remove crankshaft damper bolt.
10. Remove damper using the Crankshaft Insert 8513A (1) and the Three Jaw Puller 1026 (2).




11. Using Seal Remover 8511, remove crankshaft front seal (1).