Read and Abide By All of the Following Warnings

> Vapors emitted from the urethane adhesive or primers could cause personal injury. Use only in a well-ventilated area.

> Avoid skin contact with urethane adhesive. Personal injury may result.

> Always wear eye and hand protection when working with glass and/or urethane adhesives and primers.

> Do not operate the vehicle within 24 hours of windshield installation.

> Urethane adhesive requires minimum of 24 hours to cure fully. Uncured windshield urethane adhesive may not perform properly during certain types of accident conditions.

> Urethane adhesives are applied as a system. Use glass cleaner, glass prep solvent, glass primer, PVC (vinyl) primer and the pinch weld (fence) primer provided. If not, structural integrity of the vehicle could be compromised.

> Do not use urethane adhesive after its expiration date.

CAUTION:
Protect all painted and trimmed surfaces from coming in contact with urethane or primers. Also, be careful not to damage painted surfaces when removing moldings or cutting urethane around windshield.

CAUTION:
Roll down one of the vehicle windows before installing the windshield or quarter glass. This will avoid pressurizing the passenger compartment from a door or swing gate flip-up glass being slammed before urethane adhesive is cured. Momentarily pressurizing the passenger compartment before the urethane adhesive has cured can cause a water leak.