Amplifier (AMP)

U0011-CAN INTERIOR BUS OFF PERFORMANCE

For a complete wiring diagram, refer to the wiring information Electrical Diagrams.

- When Monitored:
Continuously when the ignition is on.

Battery voltage between 10 and 16 volts.

Ignition Off Draw (IOD) fuse installed.

- Set Condition:
The controller detects a short to ground on the CAN Interior Bus (125K)(+) circuit or a short to voltage on the CAN Interior Bus (125K)(-) circuit.






VERIFY DIAGNOSTIC TROUBLE CODE (DTC) IS ACTIVE

NOTE: Make sure the IOD fuse is installed and battery voltage is between 10 and 16 volts before proceeding.

1. Using the scan tool, read active DTCs.

Is this DTC active?

Yes

- Perform the U0011-CAN Interior Bus Off Performance Diagnostic Procedure. Refer to Module, Totally Integrated Power (TIPM)

No

- Perform the BODY VERIFICATION TEST - VER 1.Body Verification Test.