Rear Door Glass - Installation

INSTALLATION





NOTE: The following two graphics are shown with the carrier removed for clarity.

1. Install the door glass to the window opening in the door.




2. Rotate the glass downward into the run channel.




3. Access the window regulator through the hole in the carrier plate. Connect the door glass (1) to the window regulator (2).




4. Press the belt molding onto the trim panel flange starting at the rear and working forward.




5. Install the trim panel Rear Door Trim Panel - Installation.
6. Cycle the window several times to make sure the window doesn't bind on the outer weatherstrip or run channel.