Service Specifications
3.8L Cylinder Head
INSPECTION
Cylinder head must be flat within:
- Standard dimension = less than 0.05 mm (0.002 inch.)
- Service Limit = 0.2 mm (0.008 inch.)
- Grinding Limit = Maximum of 0.2 mm (0.008 inch.) is permitted.
CAUTION: 0.20 mm (0.008 in.) MAX is a combined total dimension of the stock removal limit from cylinder head and block top surface (Deck) together.
Cylinder Head:
Valves:
Valve Seat:
Valve Guide:
Valve Margin:
Valve Stem Diameter:
Valve Stem To Guide Clearance:
Valve Spring:
