Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2008 >> Wrangler 2WD V6-3.8L >> Repair and Diagnosis >> Wiper and Washer Systems >> Wiper Motor >> Service and Repair >> Wiper Module - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wiper Module - Removal







REMOVAL





1. Disconnect and isolate the battery negative cable.
2. Remove both front wiper arms from the wiper pivots. Wiper Arms - Removal.
3. Remove the cowl plenum cover/grille panel from over the front wiper module. Cowl Top Panel - Removal.
4. Disconnect the wire harness connector (5) from the connector receptacle for the front wiper motor (3).
5. Remove the two screws (2) that secure the ends of the front wiper module (4) bracket to the cowl plenum.
6. Pull the front wiper module upward to disengage the knob-like rubber isolator from the slot in the forward wall of the cowl plenum.
7. Remove the front wiper module from the cowl plenum as a unit.
pro multis · About Operation CHARM