Ignition Control

B2206-CURRENT VIN MISSING / MISMATCH

For a complete wiring diagram Refer to Diagrams/Electrical.


- When Monitored:
With the ignition on.

- Set Condition:
A PCM from another vehicle has been installed in the vehicle.








Diagnostic Test


1. PCM FROM ANOTHER VEHICLE INSTALLED
NOTE: This DTC is set when a PCM from another vehicle is installed into the current vehicle.

Has another PCM been installed?

Yes


- Replace the PCM.
- Perform BODY VERIFICATION TEST VER 1. Body Verification Test


No


- Go To 2




2. OTHER CAN-C MODULES SET VIN MISMATCH
Is VIN Mismatch DTC set in other CAN-C modules?

Yes


- Replace the PCM.
- Perform BODY VERIFICATION TEST VER 1. Body Verification Test


No


- Replace the TIPM.
- Perform BODY VERIFICATION TEST VER 1. Body Verification Test