C123A

C123A-ESP SYSTEM SENSORS CALIBRATION

For a complete wiring diagram Refer to Diagrams/Electrical.


- When Monitored:
Once per ignition cycle.

- Set Condition:
If the calculated checksum does not match the stored checksum.








Diagnostic Test


1. INITIALIZE ANTI-LOCK BRAKES MODULE
Initialize ECU Refer to ABS VERIFICATION TEST.ABS Verification Test ABS Verification Test.
Does this DTC reset?

Yes


- Replace the Anti-Lock Brake Module.
- Perform ABS VERIFICATION TEST. ABS Verification Test.


No


- Test complete.