P0600

P0600-SERIAL COMMUNICATION LINK

For a complete wiring diagram Refer to Diagrams/Electrical


- When Monitored:
With the ignition on.

- Set Condition:
Internal Bus communication failure between processors.One Trip Fault, Three Global Good Trips to Clear.







Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding.Initial Inspection and Diagnostic Overview


Diagnostic Test


1. POWERTRAIN CONTROL MODULE (PCM)

Note: Diagnose any CMP or CKP Sensor faults before continuing. Check for intermittent loose CMP OR CKP connections.

THE POWERTRAIN CONTROL MODULE is reporting internal errors, view repair to continue.

Repair

- Replace and program the Powertrain Control Module (PCM).
- Perform the POWERTRAIN VERIFICATION TEST. Powertrain Verification Test