U110F

U110F-LOST FUEL VOLUME MESSAGE





For a complete wiring diagram Refer to Diagrams/Electrical.


- When Monitored:
Ignition on.

- Set Condition:
When the PCM does not receive a fuel volume signal from the TIPM over the CAN C circuit. The circuit is constantly monitored. One Trip fault.







Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Initial Inspection and Diagnostic Overview.


Diagnostic Test


1. ACTIVE DTC
Ignition on, engine not running.
With the scan tool, select View DTCs.
Is the DTC Active at this time?

Yes


- Go To 2


No


- Refer to the INTERMITTENT CONDITION Diagnostic Procedure. Intermittent Condition)




2. U0141-LOST COMMUNICATION WITH FRONT CONTROL MODULE (TIPM) ALSO ACTIVE
With the scan tool, select View DTCs.
Is the U0141-LOST COMMUNICATION WITH FRONT CONTROL MODULE (TIPM) also set?

Yes


- Follow the diagnostics for U0141-LOST COMMUNICATION WITH FRONT CONTROL MODULE (TIPM)
- Perform the POWERTRAIN VERIFICATION TEST. Powertrain Verification Test


No


- Replace and program the Powertrain Control Module.
- Perform the POWERTRAIN VERIFICATION TEST. Powertrain Verification Test