Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2008 >> Wrangler 4WD V6-3.8L >> Repair and Diagnosis >> Brakes and Traction Control >> Disc Brake System >> Brake Pad >> Service and Repair >> Rear >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation







REAR DISC BRAKE PADS





1. Bottom pistons in caliper bore with C-clamp. Place an old brake shoe between a C-clamp and caliper piston.
2. Clean caliper mounting adapter and anti-rattle springs.
3. Install anti-rattle springs.

NOTE: Anti-rattle springs are not interchangeable.

4. Install inboard brake pad (3) in adapter (1).
5. Install outboard brake pad (4) in adapter (1).
6. Install caliper, Removal and Replacement.
7. Install wheel and tire assemblies and lower vehicle, Removal and Replacement.
8. Apply brakes several times to seat caliper pistons and brake pads to obtain firm pedal.
9. Top off master cylinder fluid level.
pro multis · About Operation CHARM