Air Suspension Hose Assembly - Description

DESCRIPTION





The air suspension hose assembly is between the body and the RF wheelhouse splash shield, connecting to the air suspension compressor assembly. The hose assembly consists of two hoses, a suction (air intake) hose (4) and an air exhaust hose (1) (labeled OUT on the valve block) for the air compressor. The suction hose (4) incorporates a filter assembly (2) for filtering the incoming air for the compressor. If water is visible inside the filter assembly (2), the air suspension hose assembly and the valve block must both be replaced. The filter assembly (2) is not serviceable alone. The air suspension hose assembly can be serviced as one component, however if the air suspension compressor assembly is replaced, the air suspension hose assembly will also be supplied.