Slider Assembly - Installation

INSTALLATION





1. Clean the track as necessary, Full Open Retractable Roof.

NOTE: Apply 5 grams of Nyogel 729F Grease to the drive track only (3).

2. Install the slider (2) being serviced into the track (1) and slide back.





3. Position the cover assembly over the slider (4).
4. Position the spring so that it engages with the locator (1) on the lift arm (3).
5. Seat the lift arm pins (2) into the slider (4) fully.





6. Unroll the top assembly and engage the sliders (2) into the tracks (1).





7. Position the rear of the cover down over the rear drive and seat fully.
8. Install the five screws (2).
9. Line up the headliner (3) center notch with the center screw (2) and seat the headliner hook and loop strip fully.
10. Install the front drive assembly. Front Drive Assembly - Installation