Slider Assembly - Removal

REMOVAL










1. Remove the front drive assembly. Front Drive Assembly - Removal
2. Manually move the rear drive assembly to open about 10 inches.





3. Separate the headliner hook and loop strip (3) and expose the drive mechanism.
4. Remove the five screws (2) and separate the cover assembly from the rear drive (1).





5. Pull the cover assembly forward and disengage the sliders (2) from the rails (1).





6. Roll the cover assembly (2) back until you get to the slider (3) being serviced.
7. Using a spreading tool (1) or equivalent, spread the slider assembly (3) apart and separate the lift arms from the slider.

CAUTION: Use care when separating the lift arms from the sliders to avoid losing the springs.






8. Remove the slider (2) being serviced from the track (1).