Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Backup Lamp Switch - Installation
INSTALLATION
1. Install back-up lamp switch (2). Teflon tape or equivalent must be used on switch threads. Tighten switch to 24 Nm (18 ft. lbs.). CAUTION: Do not overtighten switch.
2. Connect back-up lamp switch connector (2).
3. Lower vehicle.
4. Verify back-up lamp operation.