Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously

Transmission Control Module - Installation

INSTALLATION

1. Install TCM mounting bracket holes (1) over the two studs on the bulkhead.

2. Install the two nuts (4) to mounting studs (1) on the bulkhead.

3. Using a ratchet (2) and long extension (1) loosely tighten the nuts then torque to 15 Nm (130 in. lbs.).

4. Plug in electrical connectors (2) to TCM (3).

NOTE: If a new TCM is installed a learn procedure must be performed.