Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously

Front Bumper - Installation

INSTALLATION

1. Install the bumper and install the inner (2) and outer support bolts (4).
2. Tighten the support bolts to 90 Nm (66.5 ft. lbs.).
3. Connect the electrical connectors (1).
4. Install the splash shield and install the push pin fastener (3).

5. Position the splash shield (1) onto the bumper and install the push pin fasteners (2).