Rear

REAR DISC BRAKE PADS





1. Bottom pistons in caliper bore with C-clamp. Place an old brake shoe between a C-clamp and caliper piston.
2. Clean caliper mounting adapter and anti-rattle springs.
3. Install anti-rattle springs.

Note: Anti-rattle springs are not interchangeable.

4. Install inboard brake pad (3) in adapter (1).
5. Install outboard brake pad (4) in adapter (1).
6. Install caliper, Disc Brake Caliper - Installation.
7. Install wheel and tire assemblies and lower vehicle, Service and Repair.
8. Apply brakes several times to seat caliper pistons and brake pads to obtain firm pedal.
9. Top off master cylinder fluid level.