Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2011 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Power and Ground Distribution >> Relays and Modules - Power and Ground Distribution >> Power Distribution Module >> Service and Repair >> Totally Integrated Power Module (TIPM) - Removal
Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)

Totally Integrated Power Module (TIPM) - Removal






REMOVAL






NOTE: Left hand drive gasoline engine shown, left hand drive diesel similar. Right hand drive gasoline and diesel similar with the battery and related components packaged on the left side of the engine compartment.

1. Open hood.
2. Disconnect and isolate the battery negative cable.
3. Release the Totally Integrated Power Module (TIPM) cover retaining clips (1) and open the TIPM cover.
4. Remove the TIPM positive cable retaining nut (2) and remove the cable (4) from the stud.





5. Depress the four mounting clips to disengage and remove the TIPM housing (1) from its mounting bracket (4).
6. Disconnect each of the seven TIPM wire harness connectors.
7. Remove the TIPM from the vehicle.

pro multis · About Operation CHARM