Exhaust Gas Recirculation (EGR) Valve - Removal

REMOVAL





1. Disconnect and isolate the negative battery cable.
2. Remove the EGR tube and upper intake manifold Intake Manifold - Removal.





3. Disconnect the right bank ignition wires (cylinders 1, 3 and 5) from the spark plugs.
4. Disconnect the ignition wire harness tray (1) from the valve cover studs and reposition the ignition wire harness.





5. Disconnect the EGR valve (1) electrical connector (2).





6. For vehicles equipped with an automatic transmission, raise and support the vehicle Maintenance.
7. Remove the upper bolt (1) from the transmission fluid level indicator tube.





8. Remove the lower bolt (1) from the transmission fluid level indicator tube (2) and reposition tube.
9. Lower the vehicle.





10. Lower the vehicle.
11. Remove the two EGR valve mounting bolts (3) and remove the EGR valve (1).
12. Discard the gasket (2).