Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Front Suspension Stabilizer Bar Actuator - Installation
INSTALLATION
WARNING: The disconnecting stabilizer bar unit (3) is not serviced separately from the bar (2). Do not disassemble this unit from the stabilizer bar.
NOTE: The stabilizer links, stabilizer bar retainers/ bushings, stabilizer bar actuator (1) and the stabilizer bar (2) are serviceable. The new bar consists of the disconnecting unit (3) attached as an assembly to the bar.
1. Install the actuator (1) to the disconnecting unit (3). Tighten the bolts to 45 Nm (37 ft. lbs.).
NOTE: The seal must be clean and intact in the electrical connector (5) when reconnecting to the actuator (1).
2. Reconnect the electronic actuator electrical connector (5) for the disconnecting stabilizer bar (2).
3. Remove the supports and lower the vehicle.
4. Using a scan tool program the new stabilizer bar to the vehicle.