Hands Free Module (HFM) - Installation

INSTALLATION





1. Position the HFM into position and install the upper retainer (2).
2. Connect the HFM electrical connectors (1).





3. Through the instrument panel end support install the lower HFM (2) retainer (1).





4. Position the steering column opening cover (1) back and seat the retaining clips fully.





5. Position the steering column trim ring back and seat the retaining clips fully.





6. Install the silencer panel (1) and install the screws (2).





7. Install the driver side end cap (1).
8. Connect the negative battery cable and verify operation.