Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2012 >> Grand Cherokee 2WD V8-5.7L >> Repair and Diagnosis >> Body and Frame >> Frame >> Cross-Member >> Front Cross-Member Bushing >> Service and Repair >> Front Crossmember Isolator - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Crossmember Isolator - Installation





INSTALLATION

Special Tools:











CAUTION: It is very important that isolator be installed in same position as original to maintain vehicle ride quality and isolator longevity. That is why isolator, once installed, needs to closely match reference marks applied upon removal of original isolator.

1. Position isolator (3) on crossmember (1) isolator bore aligning isolator can flange with reference marks applied during removal.










NOTE: Prior to using special tools, lubricate Press, Ball Joint (1) threads to provide ease of use and promote tool longevity.

NOTE: A mixture of soap and water may be used to aid installation of the isolator.

2. Assemble tools over isolator as shown.
3. Tighten Press, Ball Joint (1) screw-drive, pressing isolator (5) into crossmember (4). Install isolator until isolator can flange contacts surface of crossmember.
4. Remove tools.





5. Install the spacer (1).
6. Install the engine cradle crossmember (2). Engine and Suspension Cradle

pro multis · About Operation CHARM