Front

REMOVAL

NOTE: Wheel removed for clarity.





1. Raise and support the vehicle.

NOTE: The inner wheel well can be pulled slightly out for access to electrical connector without removing wheel well retainers.

2. Disconnect the wheel speed sensor electrical connector (1).
3. Disconnect the wheel speed sensor wiring routing clips (2, 3).
4. Remove the wheel speed sensor wiring (4) from the brake flex hose bracket.





5. Disconnect the sensor wire routing clips from the brake hose.
6. Remove the wheel speed sensor wiring (3) from the knuckle (4).
7. Remove the front wheel sensor mounting bolt (2) and remove the sensor (1) from the knuckle (4).