Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2012 >> Grand Cherokee 2WD V8-5.7L >> Repair and Diagnosis >> Lighting and Horns >> Headlamp >> Headlamp Alignment Sensor >> Service and Repair >> Axle Sensor - Removal >> Front
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front






FRONT






NOTE: The graphic illustrates the right front axle sensor installed. The installed left front axle sensor is similar.

1. Disconnect and isolate the battery negative cable.
2. Raise and support the vehicle.
3. Locate the front axle sensor (2) within the front fender wheel house.
4. Disconnect the underbody wire harness connector from the sensor connector receptacle.
5. Carefully unsnap the upper end of the front axle sensor link from the ball stud (3) on the forward-facing side of the front suspension upper control arm (4).
6. Remove the two nuts (1) that secure the sensor mounting bracket to the two studs on the front end sheet metal.
7. Remove the front axle sensor, bracket and link from the vehicle as a unit.

pro multis · About Operation CHARM