Instrument Panel Center Bezel - Installation

INSTALLATION





1. Before proceeding with the following repair procedure, review all warnings and cautions. Service Precautions
2. Position the bezel back into the vehicle and connect the electrical connectors.





3. Secure the lower hook type fasteners (1) of the bezel (2) into the slots of the instrument panel.






CAUTION: Push down on the elbows (1) at the top of the bezel during installation. Failure to follow these instructions may result in damage to the upper elbow hooks and cause a rattle.






4. Locate the elbow hooks (1) at the top of the shift bezel (2).





5. Position the bezel up over the radio and seat the top elbow hooks (1) into the I/P slots (2) fully.





6. Seat the center and upper clips (1 and 2) fully.