Instrument Panel Center Bezel - Removal

REMOVAL

Special Tools:










1. Before proceeding with the following repair procedure, review all warnings and cautions. Service Precautions
2. Set the park brake and move the transmission gear selector into the most rearward position.

NOTE: The top of the bezel must be unseated first, then rolled back off the bottom hook fasteners.

3. Carefully pull on the vent divider (4) to gain enough clearance to insert a trim stick or equivalent (2), at the top between the bezel (3) and the storage bin (1).





4. Once inserted, using a trim stick or equivalent (2), gently separate the upper center bezel (3).





5. Rotate the upper part of the center bezel (1) down and release the clips (2) and (3) fully.
6. Lift the center bezel up and release the lower hook type clips (4) fully.





7. Reach behind the bezel to access and disconnect all electrical connections.
8. Remove the center bezel from the instrument panel.