Position Lamp Bulb - Removal

BULB - POSITION LAMP

NOTE: The following procedure applies only to vehicles manufactured for export markets. Vehicles manufactured for domestic markets do not have a position lamp bulb, socket or wiring provided in the front lamp unit.





1. Disconnect and isolate the battery negative cable.
2. Disconnect the wire harness connector from the connector receptacle integral to the position lamp bulb socket (2) on the back of the front lamp unit housing (1) located on the back of the front end module carrier.
3. Firmly grasp the position lamp bulb socket on the back of the housing and rotate it counterclockwise about 30 degrees to unlock it.
4. Pull the socket and bulb straight out from the keyed opening in the housing.
5. Pull the base of the bulb straight out of the socket.