Rear Door Outer Belt Molding - Removal

REMOVAL

Special Tools:















1. Lower window completely.
2. Insert the outer door belt molding removal tool - between belt molding and glass at rear and then slide tool forward approximately 14 cm (5.5 in.).
3. Push down on outer belt molding and rotate upper part of tool outward from vehicle approximately 6 - 8 cm (2.5 - 3 in.) then lift up on molding to disengage from locking tab.
4. Repeat step 2 and 3 at 28 cm (11 in.), 43 cm (17 in.), and 57 cm (22.5 in.) from rear of door.





5. Remove outer belt molding.