A/C Pressure Transducer - Removal

REMOVAL

NOTE: It is not necessary to discharge the refrigerant system to replace the A/C pressure transducer.






NOTE: Typical A/C pressure transducer and refrigerant line shown.

1. Disconnect and isolate the negative battery cable.
2. Disconnect the wire harness connector (1) from the A/C pressure transducer (2).
3. Remove the A/C pressure transducer from the fitting (3) located on either the A/C liquid line or A/C discharge line, depending on engine application.
4. Remove and discard the O-ring seal (4).