Removal

REMOVAL





1. Disconnect and isolate the negative battery cable.
2. Raise and support the vehicle Maintenance.
3. Clean the dirt or debris from the canister vacuum lines.
4. Disconnect the electrical connector (3) from the ESIM switch (4).
5. Disconnect the fresh air hose (5) from the ESIM switch (4).





6. A lock tab (see arrow) is used on the back of the switch. Push the lock tab towards ESIM switch while rotating counterclockwise 1/4 turn for removal.

The fresh air lines and hoses from the ESIM must have a clear opening to the atmosphere. Check the fresh air lines, including the fresh air filter, for obstructions or restrictions at the ESIM. If a restriction is present, the system will not allow free flow passage of clean air, and an early shut off of the fuel fill nozzle may occur during refueling.





7. Clean any dirt from ESIM switch (1), lines and EVAP canister opening (3).
8. Inspect the ESIM O-ring (2), replace if necessary.