Clutch Switch: Service and Repair

Clutch Pedal Position Switch
Removal
1. Disconnect the clutch pedal position switch electrical connector.
2. Remove the forward locknut.
3. Remove the switch from its bracket.

Installation
1. Install one locknut onto the threaded portion of the clutch pedal position switch, then insert the switch into its bracket.
2. Install the second locknut. Position the switch in the bracket so that its tip just touches the clutch pedal.
3. Install the first locknut up to the bracket and then back off one-half turn. Tighten the second locknut.

Tightening torque: 21 in-lb (29 N.m).

4. Connect the electrical connector.