Cruise Control Module: Service and Repair

Cruise Control Module
Removal
1. Disconnect battery negative cable.




2. Disconnect cruise control cable from cruise control module.
3. Disconnect control module connector from cruise control module.




4. Remove three nuts securing control module with bracket.
5. Remove control module with bracket from left engine compartment.
6. Remove three bolts attaching cruise control module to bracket.




7. Remove control module from bracket.

Installation
1. Position control module on control module bracket.
2. Install three bolts.

Tighten three bolts to 61 - 113 lb-in (7 - 13 N.m, 0.7 - 1.3 kg-m)

3. Position control module bracket.
4. Secure control module bracket to body using three nut.

Tighten three nut to 15 - 19 lb-ft (21 - 36 N.m, 2.1 - 3.7 kg-m)

5. Connect control module connector.
6. Connect control cable.
7. Connect battery negative cable.