Mechanical Specifications

GENERAL SPECIFICATIONS

SERVICE STANDARD





Differential side bearing end play 0.05T-0.10T mm (0.0019T-0.0039T in)
Gear backlash in differential 0.025L-0.150L mm (0.00095L-0.0057L in)
Input front bearing snap ring end play 0.01L-0.12L mm (0.00038L-0.0045L in)
Input rear bearing snap ring end play 0.01L-0.12L mm (0.00038L-0.0045L in)
Output front bearing snap ring end play 0.01L-0.12L mm (0.00038L-0.0045L in)
Output rear bearing snap ring end play 0.01L-0.09L mm (0.00038L-0.00342L in)
5TH input gear snap ring end play 0.01L-0.05L mm (0.00038L-0.0019L in)
3RD output gear snap ring end play 0.01L-0.05L mm (0.00038L-0.0019L in)

TIGHTENING TORQUE





WARNING: Always follow torque tightening levels. Failure to follow such levels can result in parts breaking if over-tightened or loosening if under-tightened. In either case, serious personal injury or death could result to vehicle occupants.