Cruise Control: Service and Repair

INSTALLATION

1. Position control module on control module bracket.
2. Install three bolts.

Tighten three bolts to:
5.1 - 9.4 lb.ft (7 - 13 Nm, 0.7 - 1.3 kg.m)

3. Position control module bracket.
4. Secure control module bracket to body using three bolt.

Tighten three bolts to:
15.2 - 26.8 lb.ft (21 - 36 Nm, 2.1 - 3.7 kg.m)

5. Connect control module connector.
6. Connect control cable.
7. Connect battery negative cable.