Procedures

OPERATING THE SUNROOF EMERGENCY HANDLE

1. Use the sunroof emergency handle to close and open the sunroof manually for the following case only.

To close the sunroof before driving a vehicle in a rainy day or on the highway if the sunroof can not be closed due to failure of the sunroof motor or controller.

2. Operating method
Remove the overhead console

Push the emergency handle up into the hexagonal drive (A) of the sunroof motor. You must push hard enough to disengage the motor clutch; otherwise the emergency handle will slip due to in complete fit in the motor.

Carefully turn the emergency handle clockwise to close the sunroof.

After closing the sunroof, wiggle the handle back and forth as you remove the tool from the motor, to ensure the motor clutch reen gages.

A 5 mm hex socket may be used in place of the emergency handle, with a" Speeder" type handle.

CAUTION: Do not use power tools to operate the sunroof. Damage to the components may occur.