Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Filter: Service and Repair

FUEL PUMP

REMOVAL (INCLUDING FUEL FILTER AND FUEL PRESSURE REGULATOR)
1. Preparation
1. Remove the 3rd seat.




2. Open the service cover (A).




3. Disconnect the fuel pump connector (A).
4. Start the engine and wait until fuel in fuel line is exhausted.
5. After engine stalls, Turn the ignition switch to OFF position.




2. Disconnect the fuel feed tube quick-connector (A), the fuel tank pressure sensor connector (B), and the canister close valve connector (C).







3. Remove the rubber cover (D).
4. Unscrew the fuel pump plate cover (A) with the special service tool (SST No.: 0931 0-28200) and remove the fuel pump assembly.

INSTALLATION
Installation is reverse of removal.

Fuel Pump Plate Cover Tightening : 78.5 - 98.1 N.m (8.0 10.0 kgf.m. 57.9 - 72.4 lbf.ft)