Rear Door Window Glass: Service and Repair

GLASS REPLACEMENT

NOTE: Put on gloves to protect your hands.

1. Remove the door trim.
2. Remove the door belt weatherstrip.
3. After loosening the mounting bolt and screw, then remove the quarter glass assembly (A).






4. Release the rear channel mounting bolt and nut.

CAUTION: Take care not to drop to glass and scratch the glass surface.

5. Carefully move the glass (A) until you can see the clip, then loosen them. Separate the glass from the glass run and carefully pull the glass out through the window slot.






6. Installation is the reverse of removal.

NOTE:
- Roll the glass up and down to see if it move freely without binding.
- Adjust the position of the glass as necessary.