Operation CHARM: Car repair manuals for everyone.
Home >> Kia >> 2008 >> Sedona V6-3.8L >> Repair and Diagnosis >> Brakes and Traction Control >> Relays and Modules - Brakes and Traction Control >> Electronic Brake Control Module >> Service and Repair >> Repair Procedures
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Repair Procedures




REMOVAL

1. Remove the air cleaner.
2. Disconnect the brake tube from the HECU by unlocking the nuts counterclockwise with a spanner.




3. Disconnect the connector(A) from the HECU.








4. Remove the two HECU brake mounting bolts(B) , and then disassemble the HECU with the bracket.

CAUTION:
a. Never attempt to disassemble the HECU.
b. The HECU must be protected during storage and transport, and must not be subjected to excessive shock.

5. Remove the two HECU mounting nuts (C) and washer, and then remove the bracket.

INSTALLATION

1. Installation is the reverse of removal.
2. Tighten the HECU mounting bolts and brake tube nuts to the specified torque.

Tightening torque HECU mounting nut : 6-10 Nm (0.6 - 1.0 kgf-m, 4.34 - 7.23 lb-ft) / HECU bracket mounting bolt: 17 - 26 Nm (1.7 - 2.6 kgf-m, 12.3 - 18.8 lb-ft)

pro multis · About Operation CHARM